Politex Premium Semi-Gloss Acrylic Paint

Politex Premium acrylic paint is specially formulated by using high-quality water-based acrylic resin. This product is low in VOC, low in odour, and environmentally friendly, which is an ideal solution to all your painting needs on chalk, brick, and concrete surfaces. Politex has excellent adhesion and hiding power, ensuring the consumer uses much less paint in comparison with other products in the market.

Application and storage condition

Use this product as an undercoat and topcoat on interior and exterior surfaces. Tint white Politex paint by adding Politex pigmented paint or pastes. Before painting, clean the surface from dust, grease, and any pollutant that may decrease adhesion. Apply suitable primer and dilute the paint by adding 5-10% Water. Apply the paint on the dried surface with a roller, brush, or airless spray. If necessary, apply the next layer after at least 2 hours. Theoretical coverage is 8-10 m² per liter per coat.
The temperature of the surface and environment should be above 15⁰C. Wash equipment with water after painting.
In case of contact with eyes, wash immediately with plenty of water. Protect this product from frost and store at 5-45⁰C Keep out of reach of children.
Expiration 2 years after production.


Stir before use.

Dulite with 5-10% water.

Apply by brush, roller, or spray.

Clean up all equipment with

clean water immediately after use.


Drying Time:

 30min :Touch Dry
1hour :Hard Dry
1-2hours :Recoat




Theoretical Coverage: 8-10 m2 per liter per coat

(Dependent on the substrate condition)

No, of coats: 2-3 coat